Why do the speakers on my IGS WAHLAP TECH OverTake not produce sound?
If your IGS Arcade Game Machines' speakers aren't producing sound, first, open the cash box door and ensure the master volume isn't at its minimum. Next, open the maintenance door at the cabinet's bottom and check the power amplifier's volume. Also, check if the power amplifier is on and if the plugs between the power amplifier and cabinet are securely connected.
What to do if the screen appears blank on my IGS Arcade Game Machines after turning it on?
If the screen of your IGS Arcade Game Machines appears blank after powering on, check if the plugs between the cabinet and screen are well connected and if the DVI connectors on both sides are secure. Also, verify that the cabinet is plugged into the video card port. If the issue continues, contact your local distributor.
How to fix throttle, brake, or steering wheel failure on IGS WAHLAP TECH OverTake?
If the throttle, brake, or steering wheel on your IGS Arcade Game Machines aren't working, enter Operator settings, then Hardware test, and run the I/O test. If testing results are shown, go to Operator settings, Game settings, I/O adjustment to adjust the I/O. If no results appear, contact your local distributor to replace the VR.
What to do if the buttons on my IGS WAHLAP TECH OverTake Arcade Game Machines do not respond?
If the buttons on your IGS Arcade Game Machines aren't responding, go to Operator settings, then Hardware test, and run the I/O test. If the lights still don't respond, disassemble the cap to check if the plugs are securely connected. If the issue persists, contact your local distributor to replace the VR.
General| Brand | IGS |
|---|---|
| Model | WAHLAP TECH OverTake |
| Category | Arcade Game Machines |
| Language | English |
To Next Page
