IGS WAHLAP TECH OverTake - Replacing the vibration speaker under the seat; Replacing the vibration speaker behind the seat

4.7 Troubleshooting
47
47
Problems Easy troubleshooting
The throttle, brake or the
steering wheel fail to work.

Enter【Operator settings】→【Hardware test】→【I/O test】to
run the testing.

If testing results are shown, enter【Operator settings】→【Game
settings
】→【I/O adjustment】to adjusting I/O.

If no testing results are shown, contact your local distributor to replace
the corresponding VR.
One of the speakers does
not produce sound.

Check if the plugs between speakers and power ampli er are coming
off.

If this problem persists, contact your local distributor to replace parts.
The light of the LED plate is
not on.

Check if the plugs between speakers and power ampli er are coming
off.

If this problem persists, contact your local distributor to replace parts.
The buttons do not respond.

Enter【Operator settings】→【Hardware test】→【I/O test】, and
run the testing.

If lights do not respond, refer to【Replacing parts】and dissemble
the cap to check if plugs are coming off.

If this problem persists, contact your local distributor to replace the
corresponding VR.
The shift gear does not
respond.

Enter【Operator settings】→【Hardware test】→【I/O test】to
run the testing.

If this problem persists, contact your local distributor to replace the
shift gear.
The screen appears blank
after the power is on.

Check if the plugs between the cabinet and screen are well connected,
and whether DVI connectors on both sides are coming off.

Check if the cabinet is plugged into the port of the video card.

If this problem persists, contact your local distributor.
The speakers do not
produce sound.

Open the door of the cash box, and check if the master volume is
adjusted to its minimum value.

Open the maintenance door located in the bottom of the cabinet, and
check if the volume of the power ampli
er is adjusted to its minimum
value.

Check if the power of the power ampli er is turned on.

Check if the plugs between the power ampli er and cabinet are
coming off.
※
If any of the above mentioned problems is unsolvable, contact your local distributor.