IGS WAHLAP TECH OverTake - Tunnel setting; Coin settings

30
30
4.3.6 Speaker test
4.3.7 Vibration seat test
In the page of
【
Vibration seat test
】
, you can test whether the vibration chair is normally
functioning or not.
1
Enter
【
Operator settings
】
→
【
Hardware test
】
→
【
Vibration seat test
】
, and the
screen will display as below
：
2
Use the
【
Gear up
】
and
【
Gear down
】
functions on the gear stick to move the cursor,
and choose the
【
Vibration seat test
】
, then press the
【
Start
】
button to start testing.
In the page of
【
Speaker test
】
, you can test whether the loudspeaker is normally
functioning or not.
1
Enter
【
Operator settings
】
→
【
Hardware test
】
→
【
Speaker setting
】
, and the screen
will display as below
：
2
Use the
【
Gear up
】
and
【
Gear down
】
functions on the gear stick to move the cursor,
and choose the soundtrack to be tested, then press the
【
Start
】
button to start testing.
3
The soundtrack being tested will keep producing a certain sound, and press the
【
Start
】
button to discontinue the testing process.
4
After the testing is completed, move the cursor to
【
Exit
】
, and press the
【
Start
】
button
to return to
【
Hardware test
】
.
3
The seat being tested will keep producing with a certain vibration, and press the
【
Start
】
button to discontinue the testing process.
4
After the testing is completed, move the cursor to
【
Exit
】
, and press the
【
Start
】
button
to return to
【
Hardware test
】
.