IGS WAHLAP TECH OverTake - Game settings

4.3.3 Force feedback test
27
27
In the page of
【
Force feedback test
】
, you can test whether the force feedback is normally
functioning or not.
1
Enter
【
Operator settings
】
→
【
Hardware test
】
→
【
Force feedback test
】
, and the
screen will display as below
：
2
Use the
【
gear up
】
and
【
gear down
】
functions on the gear stick to move the cursor, and
choose the
【
steering wheel
】
, then press the
【
Start
】
button to run testing.
3
While testing, press the
【
Start
】
button one more time to discontinue the testing process.
4
After the testing is completed, move the cursor to
【
Exit
】
and press the
【
Start
】
button to
return to
【
Hardware test
】
.