Ihse Draco tera enterprise 480 Series - Assigning Virtual con Devices; Fig. 80 OSD Menu Assignments - Virtual con Device

Draco tera enterprise Configuration via OSD
125
6.7.6 Assigning Virtual CON Devices
In this menu, several real CON Devices can be assigned to a virtual CON Device.
This function reflects changes in permission made to virtual CON Devices onto real CON Devices. Virtual
CON Devices can be switched in the same way as real CON Devices. Real CON Devices that are assigned
to a virtual CON Device that is connected to a CPU Device will receive the video signal. The last assigned
CON Device will also have control of the keyboard and mouse.
A
virtual CON Device can be assigned to more than one real CON Devices.
Fig. 80 OSD Menu Assignments - Virtual CON Device
For an assignment, proceed as follows:
1. Select Assignments > Virtual CON Devices in the main menu.
2. Select the real CON Device in the Real Devices list that has to be assigned to a virtual CON Device.
3. Click Edit.
4. Select the virtual CON Device in the Virtual Devices list that has to be assigned to the selected real
CON Device.
5. Click Okay to confirm the assignment.
The selected virtual CON Device is assigned to the real CON Device.