Ihse Draco tera enterprise 480 Series - Fig. 251 Management Software Menu Extender & Devices - con Devices - Send OSD Message to

Draco tera enterprise Maintenance
341
7. Select the CON Device Available list which should receive the message. By pressing and holding
down Ctrl at the same time, more than one CON Device can be highlighted.
8. Click to move the highlighted CON Device(s) to the Send message to… list. By clicking , all CON
Devices will be moved to the Send message to… list.
9. To remove highlighted CON Device(s) from the Send message to… list, click . By clicking , all CON
Device(s) will be removed from the Send message to… list.
10. Click Finish.
Fig. 251 Management software menu Extender & Devices - CON Devices - Send OSD Message to… -
Select CON Devices
The message is immediately sent to all selected CON Device(s).
11. Click Deactivate Edit Mode in the toolbar.