Ihse Draco tera enterprise 480 Series - Extended Switching; Fig. 211 OSD Menu Extended Switch

Operation via OSD Draco tera enterprise
302
To activate the scan mode, proceed as follows:
1. Define a favorite list for the respective CON Device (see chapter 6.7.4, page 122) or users (see
chapter 6.4.2, page 95).
2. Press Hot Key + o or the Fast Key to open the OSD.
The extender OSD opens with the CPU Device selection list.
3. Select one of the CPU Devices in the CPU Device selection list that are defined in your favorite list.
4. Confirm your selection by clicking CPU Scanner. The scan will automatically start.
If you have enabled the
Force CPU Scan option (see chapter 6.7.3, page 119), the scan will automatically
start after switching the respective CON Device to any CPU Device from the favorite list without the need to
click
CPU Scanner.
9.1.2 Extended Switching
At least power user rights are
required according to the CON Device ACL or User ACL.
Press
F8 to hide inactive CPU Devices to provide a clearer overview. Press F8 again to expand the current
view to show inactive CPU Devices.
Fig. 211 OSD Menu Extended Switch