Draco tera enterprise Operation via OSD
303
The following information is shown in this menu:
Field Description
CON device Real CON Device with assigned CON EXT Unit.
CON assigned Virtual CON Device that is assigned to the real CON Device.
CPU connected Currently connected CPU Device.
CON status Current connection status (CON Device).
EXT list List of all available physical EXT Units.
CPU device Assigned physical EXT Unit.
CPU assigned Real CPU Device that is assigned to a virtual CPU Device.
CON connected Currently connected CON Device.
CPU status Current connection status (CPU Device).
EXT list List of all available physical EXT Units
The following keyboard commands are available for switching operations after selecting a CON Device and
pressing Enter:
Keyboard command Function
Space Set a Video Only connection.
Enter Set a KVM connection.
Shift + Enter Set a KVM connection in Private Mode (video sharing disabled).
Backspace Disconnect the own CON Device from CPU Device.
To switch any CON Device to any available CPU Device, proceed as follows:
1. Click Switch in the main menu.
2. Select in the CON Devices list on the left-hand side that one that should be switched to a CPU Device.
3. Press Enter.
The connection types and their corresponding keyboard commands are listed in the lower working
area.
4. Select in the CPU Devices list on the left hand side that one that should be connected to the open
CON Device.
5. Press the appropriate keyboard command to confirm the desired connection type.
Switching operations from the user’s CON Device can only be performed on CPU Devices that are
available in the
CPU Devices list.
To Next Page
Loading...
