Ihse Draco tera enterprise 480 Series - Setting Access Rights for Logging in to the OSD; Fig. 120 Management Software Menu User Settings - Users & Groups - Users - Login Lock

Draco tera enterprise Configuration via Management Software
189
7.5.4 Setting Access Rights for Logging in to the OSD
Users can be blocked from logging in for certain CON Devices.
Fig. 120 Management software menu User Settings - Users & Groups - Users - Login Lock
To lock the login to the OSD of specified CON Devices, proceed as follows:
1. Click User Settings> Users & Groups in the task area.
2. Click Activate Edit Mode in the toolbar.
3. Select the appropriate user from the Users list for whom the login for the OSD should be restricted.
4. Click the Login Lock tab in the working area.
5. Select the CON Devices in the Allowed Login list that should be added to the list of locked CON
Devices, (Locked Login). By pressing and holding down Ctrl at the same time, more than one CON
Device can be highlighted.
6. Click to move the highlighted CON Devices to Locked Login list. By clicking , all CON Devices
from the Allowed Login list will be moved to the Locked Login list.
7. To remove highlighted CON Devices from the Locked Login list, click . By clicking , all CON
Devices will be removed from the Locked Login list.
8. Click Apply to confirm the changes.
9. Click Deactivate Edit Mode in the toolbar.