Ihse Draco tera enterprise 480 Series - Fig. 171 Management Software Menu Extender & Devices - con Devices - Select Settings; Assigning Settings to Other con Devices; Assigning;Copying Settings of con Devices

Draco tera enterprise Configuration via Management Software
251
7.8.9 Assigning/Copying Settings of CON Devices
7.8.9.1 Assigning Settings to other CON Devices
To assign settings of a CON Device to other CON Devices, proceed as follows:
1. Click Extender & Devices > CON Devices in the task area.
2. Click Activate Edit Mode in the toolbar.
3. Select the CON Device whose settings are to be assign to another CON Devices.
4. Click Assign Settings to below the CON Device list.
A query to select the settings appears.
5. Tick the checkboxes to select the desired settings.
6. Click Next >.
Fig. 171 Management software menu Extender & Devices - CON Devices - Select Settings
A query to start the assignment appears.