Ihse Draco tera enterprise 480 Series - Fig. 221 Management Software Menu View - Matrix

Operation via Management Software Draco tera enterprise
314
To perform a switching operation, proceed as follows:
 To set a KVM connection between a CON Device and a CPU Device, double-click on the
corresponding selection box within the Full Access column and select the requested CPU Device.
 To set a video connection between a CON Device and a CPU Device, double-click on the
corresponding selection box within the Video Access column and select the requested CPU Device.
 To set a Private Mode connection between a CON Device and a CPU Device, double-click on the
corresponding selection box within the Private Access column and select the requested CPU Device.
If a CPU
Device does not have access rights, it will not appear in the list.
If the Auto Send
checkbox is ticked in the lower left corner of the workspace, the switching operations will
be performed immediately without user confirmation by clicking
Send.
If
the Hide Devices w/o Extender Assignment function in the left lower corner of the work area is ticked,
only CON
Devices and CPU Devices that are assigned to EXT Units are shown.
Possibility 2
Fig. 221 Management software menu View - Matrix