The StellarMate Plus Manual
11 / 341
If you purchased StellarMate OS, the Device Serial Number is automatically
generated for you.
4.1.2 Steps
Register your controller after downloading the SM App. Make sure your tablet is
connected to the internet.
1. Launch StellarMate App on iOS or Android.
2. Tap on the Register button.
3. Enter registration information to sign up in StellarMate website and then click
Next.
4. Scan the QR Code found at the back of the unit.
After registration is successful, you will be logged in automatically. Check your
email for your license and login information.
4.2 Connecting to StellarMate
Go to your mobile OS WiFi settings and connect to the StellarMate hotspot.
Hotspot: stellarmate
Password: smate
IMPORTANT
Before using the StellarMate App to configure your unit for the first time,
please use the networking settings in your iOS/Android phone/tablet to
connect to the HotSpot first. Once connected, proceed to run the
StellarMate App.
To Next Page
Loading...