The StellarMate Plus Manual
34 / 341
4.5.2.2 Align
The Align module enables highly accurate GOTOs and dead-center target images
by utilizing plate-solving. The process starts with capturing an image and plate-
solving it to get the exact sky coordinates. Once the coordinates are obtained,
the mount is synchronized and then commanded to slew to the correct target
position. This cycle repeats until the mount is within a few arcsecs from the
target.
It has the following features:
· Presets: you can save an unlimited amount of presets, which have all the
camera settings needed for alignment. You can also choose the scope and
change the StellarSolver profile.
· Three Actions: sync, slew to target or do nothing.
· Capture & Solve
· Load and Slew
· Image Viewer
· Alignment Plot
To Next Page
Loading...