The StellarMate Plus Manual
230 / 341
o ADU: Duration is variable until specified ADU is met.
Before the calibration capture process is started, you can request Ekos to park
the mount and/or dome. Depending on your flat source selection above, Ekos will
use the appropriate flat light source before starting flat frames capture. If ADU is
specified, Ekos begins by capturing a couple of preview images to establish the
curve required to achieve the desired ADU count. Once an appropriate value is
calculated, another capture is taken and ADU is recounted until a satisfactory
value is achieved.
Video Tutorials
Capture
Filter Wheels
18.4.8.4 Focus
Theory Of Operation
To Next Page
Loading...
