The StellarMate Plus Manual
7 / 341
IMPORTANT
A 32GB (or more, depending on your order) MicroSD card is already
inserted into the StellarMate Gadget when it is shipped. It might have
moved or detached during shipping, please make sure it is secured into
its designated slot at the bottom of the unit.
Connect the USB-C power supply cable to StellarMate Plus and then turn power
on. You should initially see a solid red light with occasional flashes of green. Wait
for 30 seconds, your StellarMate Plus is now ready to be used!
https://www.youtube.com/embed/2cOau9jBeJo
3. Introduction
StellarMate Plus is the Next Generation Internet-of-Things Astrophotography
To Next Page
Loading...