The StellarMate Plus Manual
79 / 341
A confirmation dialog will be shown to you.
6.2 Manual Pairing
Bluetooth dongles are supported. Before you can start communicating with your
device from StellarMate, you need to pair it. In order to pair the device, please
log in to StellarMate OS either via Direct HDMI connection or via VNC Viewer in
the StellarMate App.
After you pair your device, you should have a bluetooth ported assigned to it
(e.g. /dev/rfcomm0). This is the port you should use in INDI when
communicating with your device.
7. Connecting CCDs
StellarMate Plus supports a broad range of camers (CCD/CMOS). Find out if your
To Next Page
Loading...
