The StellarMate Plus Manual
88 / 341
· Bluetooth
9.2 Serial to USB
IMPORTANT
In order to connect your mount via Serial to USB, you need to get a
mount-specific Serial to USB cable, which can be bought from Ikarus
Technologies.
Most mounts provide an RS232 port (usually located in the handset). An RS232
to USB cable is required in order connect the mount to StellarMate. StellarMate is
equipped with 4 USB ports. However, it is highly recommended to use an external
powered USB Hub as it can reliably support power to your equipment.
WARNING
To Next Page
Loading...