The StellarMate Plus Manual
50 / 341
4.5.2.5 Mount
The Mount module allows you to do Meridian Flips and set limits for your Mount,
it has the following features:
· Tracking On/Off
· Mount Park/UnPark
· Meridian Flip
o Flip if HA >: Request a meridian flip if the hour angle exceeds the
specified value. Capture and Guiding will be suspended and resumed
after the flip is complete.
o Pier Side: Shows the pier side direction.
· Limit Settings: You enable Altitude Limits or Hour Angle Limits if you do not
wish your mount to move past a specific limit. The values are expressed in
hours. Setting a 1 hour (HA) limit means your mount is restricted to 15 degrees
east and west of the meridian. Setting it to 3 HA (3*15) means your mount is
free to move 45 degrees east and west of the meridian.
·
To Next Page
Loading...