The StellarMate Plus Manual
49 / 341
File Settings
Settings for specifying where captured images are saved to, and how to generate
unique file names.
· Prefix: Specify prefix to append to the generated filename. You may also
append the frame type, filter, expose duration, and ISO 8601 timestamp. For
example, if you specify Prefix as M45 and checked the Type and Filter
checkboxes, and assuming your filter was set to Red and your frame type
is Light, the generated file names will be as following:
o M45_Light_Red_001.fits
o M45_Light_Red_002.fits
· If TS was checked, a timestamp will be appended to the filename, e.g.
o M45_Light_Red_001_2016-11-09T23-47-46.fits
o M45_Light_Red_002_2016-11-09T23-48-34.fits
· Script: Specify an optional script to be executed after each capture is
complete. The full path of the script must be specified and it must executable.
To denote success, the script must return zero as this would allow the
sequence to continue. If a non-zero value is returned by the script, the
sequence is aborted.
· Directory: Local directory to save the sequence images to.
To Next Page
Loading...
