The StellarMate Plus Manual
95 / 341
Therefore, in KStars, the time and location information MASTER source can be
selected from the following sources:
· KStars Updates All Devices: KStars time and location is the primary source
and all connected devices (mounts..etc) are synchronized to KStars time and
location. When using SM App, itʼs recommended to leave this option as is.
· Mount Updates KStars: The mount time and location are used to update
KStars time and location. Some mounts are equipped with internal or external
GPS, KStars does NOT connect to these mount-specific GPS dongles. Instead,
KStars communicates with the mount via the Handset/WiFi to query time and
location information and then uses them as the source.
· GPS Updates KStars: When using a dedicated externa GPS dongle, select this
option to ensure the GPS dongle is the master source for both time and
location. When Ekos detects a GPS device, it will prompt the user to switch to
it as the master time & location source.
Therefore, you must select which source is the most accurate and reliable for
time & location information. By default, KStars is the master source for time and
location data.
WARNING
Turn off DST / Daylight Saving settings in the handset as this could
interfere with correct time settings.
13. Web Manager
StellarMate Web Manager is a simple Web Application to manage INDI server and
control StellarMate. It is accessible as long as there is a network connection
(WiFi/Ethernet/Hotspot) between you and StellarMate. For example, if you are in
inside the house with a PC/Mac/Tablet, you could use your browser to remotely
manage StellarMate drivers.
It supports multiple driver profiles along with optional custom remote drivers. It
can be used to start INDI server locally, and also to connect or chain to remote
INDI servers. You can use it to Restart or Shutdown the unit, and to connect to
VNC frontend from the web. Furthermore, the Web Manager provides a RESTful
API where you can issue simple calls to start and stop INDI services over the
network.
With the Web Manager, you can access StellarMate Serial Port
Assistant and VNC. Furthermore, you can also restart and shutdown INDI from the
interface.
To Next Page
Loading...
