The StellarMate Plus Manual
159 / 341
File →Printing Wizard
Starts a wizard to configure capturing sky objects images using telescope and
printing the results as a good looking printout for further use or catalogization.
File →Print...(Ctrl+P)
Send the current sky map to the printer (or to a PostScript/PDF file)
File →Quit(Ctrl+Q)
Quit KStars
Time Menu
Time →Set Time to Now(Ctrl+E)
Sync time to system clock
Time →Set Time...(Ctrl+S)
Set time and date
Time →Advance one step backward in time(<)
Advance one step backward in time in the KStars simulation of the sky chart. The
duration of the time step can be configured after pressing the little > button on
the KStars toolbar.
Time →Stop Clock
Toggle whether time passes
Time →Advance one step forward in time(>)
Advance one step forward in time in the KStars simulation of the sky chart. The
duration of the time step can be configured after pressing the little > button on
the KStars toolbar.
Pointing Menu
Pointing →Zenith(Z)
Center the display at the Zenith point (straight up)
Pointing →North(N)
Center the display above the North point on the horizon
Pointing →East(E)
Center the display above the East point on the horizon
Pointing →South(S)
Center the display above the South point on the horizon
Pointing →West(W)
Center the display above the West point on the horizon
Pointing →Set Coordinates Manually...(Ctrl+M)
To Next Page
Loading...
