The StellarMate Plus Manual
268 / 341
need to install python.
· Rotator: Rotator threshold in arc-minutes when using Load & Slew. If the
difference between measured position angle and FITS position angle is below
this value, the Load & Slew operation is considered successful.
· Time out: Timeout in seconds to wait for astrometry solver to complete.
· WCS: World-Coordinate-System is a system for embedding equatorial
coordinate information within the image. Therefore, when you view the image,
you can hover it and view the coordinate for each pixel. You can also click
anywhere in the image and command to the telescope to slew there. It is
highly recommended to keep this option on.
· Overlay: Overlay captured images unto the sky map of KStars.
· Upload JPG: When using online astrometry.net, upload all images are JPEGs to
save bandwidth as FITS images can be large.
· Auto Park: Automatically park the mount after completing Polar Alignment
Assistant Tools.
WARNING
Turning Auto Park off might lead to inaccurate results.
Solver Options
Ekos selects and updates the optimal options by default to accelerate the
performance of the solver. You may opt to change the options that are passed to
the solver in case the default options are not sufficient.
To Next Page
