The StellarMate Plus Manual
36 / 341
Capture & Solve
To start capturing and solving, just tap on the Capture & Solve button and the
StellarMate will take care of the rest. When it's done, you will be able to see the
current Alignment capture preview, alignment info on the solution bar on the
bottom, and the points on the Alignment plot. The points on the alignment plot
have 3 different colors: Red, Yellow and Green. If a point is red, that means that
the error is 1.5 times or more above the accuracy value, if it's yellow, that means
that the error is between 1 times to 1.5 times above the accuracy value, and
finally, if it's green, that means that the error is within the accuracy value. The
accuracy value can be changed in the preset settings.
To Next Page
Loading...
