The StellarMate Plus Manual
52 / 341
The Observatory module allows you to control your Dust Cap and Dome/Roll-off
roof, it has the following features:
· Dust Cap Park/UnPark
· Dome Park/UnPark
· Roll-off roof Park/UnPark
· Abort Dome Motion
· Goto Absolute Dome Angle
Going to an absolute angle position
You can go to an absolute angle position on your dome by tapping on the
textbox next to the Azimuth label and setting the angle value to go to. Now tap
on the GO button to go to that angle position. The dome will now try going to
that position, the dome status badge will show what type of rotation the dome is
doing, and a compass preview will show a representation of the dome angle.
After the movement is complete, you will be able to see the status badge change
to "Tracking".
To Next Page
