www.ikegps.com/quickstart Page 37 www.ikegps.com/support
The camera will click, and depending on camera
settings, will either show the review screen or revert to
the Target Position task selection screen
With the review screen enabled the screen will display a
static image of the target photo and the instrument time
at time of capture. You can tap the:
Information icon (top-left) to access
geospatial data about the target
Green ‘back’ arrow (bottom-right) to retake
the target. This will return to the preview
screen.
The information screen will provide instrument readings
in regards to the local (ike) position, target position and
other instrument readings.
Tap the Next button to save the target and continue.
Where there is a successful recording a green tick will
appear alongside the task.
From here the information can be abandoned (tap the
Home button), retaken (tap Target Position again to
delete the photo and re-enter the video preview), and
data entered into non-mandatory Label and Comment
fields.
Tap the Label task button to enter the Label entry
screen.
Tap the Comment task button to enter the Comment
entry screen.
Tap the Save button to save the target without
Label/Comments recorded and return to the Home
screen.
Tap the Home button to abandon the target and delete
the recorded data.
To Next Page
Loading...