iLumin SC-RP User Manual

P33
Step 15 (continued)
Event options
Type
This option determines whether the event should be
based on an absolute time (‘Time’) or a variable oc-
currence (‘Astro’) such as dawn or dusk. A ‘Disabled’
setting allows you to make the current event inactive.
Repeat
Exact Time - Begins the selected action only at a
specied time, day, month and year.
Daily - Begins the selected action at the specied time
every day.
Specic Days - Begins the selected action at the
specied time on every day that is chosen within this
option. When you rst choose this option, the screen
will show: ‘No days selected’. Press the numeric but-
tons between 1 and 7 (button 1 = Sunday, 2= Monday,
etc.) to include or exclude the days when the event
should occur.
Annually - Begins the selected action once a year at
the specied time and date.
Time (and date) setting
The time (and date, where appropriate) setting has
different effects depending on the setting of the ‘Type’
option:
• If ‘Type’ is set to ‘Time’ then this setting provides an
absolute start time for the chosen action.
• If ‘Type’ is set to ‘Astro’ then this setting provides an
offset period for the chosen action, from the astro-
nomical event. For example, if the ‘Before Dusk’
option is set and the time setting shows 02:00, then
the event will be started two hours before dusk.
Astronomical setting
These options appear only when the ‘Type’ option is
set to ‘Astro’. This setting will appear in the summary
screen, immediately after the time setting. The system
uses the location coordinates as well as the time
and date to calculate when each astronomical event
should occur.
Absolute Time - Changes the ‘Type’ option from ‘As-
tro’ back to ‘Time’.
Before Dawn - Begins the selected action at a period
(dened by the time setting) before dawn.
After Dawn - Begins the selected action at a period
(dened by the time setting) after dawn.
Before Dusk - Begins the selected action at a period
(dened by the time setting) before dusk.
After Dusk - Begins the selected action at a period
(dened by the time setting) after dusk.
Action
The list of actions are collected into two groups: ‘Basic’
and ‘Advanced’ (there are links from one group to the
other within the list). In all cases, the chosen action
occurs when the corresponding event’s time conditions
are met.
Basic
No Action - Effectively disables the event.
Select Scene - Displays a Scene (within a particular
Area) over a selected fade time.
Zone Level - Applies a nal level to a single Zone
(within a particular Area) over a selected Fade time.
Advanced
Zone Increment - Increases the dimming level of a sin-
gle Zone (within a particular Area) by a chosen percent-
age over a selected Fade time.
Zone Decrement - Decreases the dimming level of a
single Zone (within a particular Area) by a chosen per-
centage over a selected Fade time.
Scene Modify - Selectively alters the dimming level of
any currently displayed Scene within a particular Area
over a set fade time. Within each Scene, only those
Outputs that have been previously marked as ‘Scene
Modify’ (in iCANsoft) or ‘SM’ (in the SCRP Switched
Relay Controller menu) will be altered. All Outputs that
have not been marked will remain unaffected by this
action. See Step 8 for details about applying the
‘SM’ mark.
Zone Toggle - Changes between the current level of
a single zone (within a particular Area) and the level
entered in this option over a selected Fade time.
Start Sequence - Sets a pre-programmed sequence
(created using the iCANsoft application) running, begin-
ning at any chosen step from 1 to 30.
Stop Sequence - Stops a pre-programmed sequence
at any chosen step from 1 to 30.
Pause Sequence - Pauses a pre-programmed
sequence.
Send CAN message - Transmits a CAN message that
has been pre-programmed using iCANsoft.
Enable Event - Allows another event to become active
when the parameters of this event become true. This
is useful for conning repetitive event actions to occur
only within a set period of time.
Disable Event - Changes an active event to its disabled
state when the parameters of this event become true.

iLumin SC-RP Specifications

General

Brand	iLumin
Model	SC-RP
Category	Controller
Language	English