To Next Page

To Previous Page

P38

Overriding Outputs

On occasions it may be necessary to override the levels

of one or more Outputs. This option provides the ability

to affect Outputs individually or all of them collectively.

You may also select any of the rst 128 standard Scenes

or even the Emergency Scene (Scene 132).

To override Outputs

1. From the Operation menu, highlight the ‘Output Over-

ride’ option and press the

ENT

button. The display will

show the available options:

2. Use the

buttons to highlight the required

option and press the

ENT

button to select:

• All Outputs

Override-Options

All Outputs

Each Output

Select Scene

Override: Each Output

Output1 100%

Output2 100%

Output3 100%

Output4 100%

Override: AllOutputs

Enter Level

100%

• Each Output

Use

and

or the key-

pad (and

ENT

) to select the

level (0 to 100%).

Press the

ESC

button to exit.

Use

and

to highlight

the required Output.

Use

and

or the

keypad (and

ENT

) to select

the dimming level (0 to 100%)

or to switch on to off.

Press the

ESC

button to exit.

• Select Scene

Override: Select Scene

Select Scene

Note: If there are no settings within a selected Scene, the

display will show ‘Scene Empty’.

3. Press the

ESC

button to return to the Operation menu.

Use

and

or the key-

pad (and

ENT

) to select the

required Scene.

Press the

ESC

button to exit.

Viewing Power Data

The Power Data section provides useful feedback and

conrmation of the total power demanded within the

SCRP Switched Relay Controller, listed as a total for the

whole unit, as totals by phase or values for individual

Outputs.

To view power data from the menu

1. Use the

buttons to highlight the ‘Display

by Output’ option and press the

ENT

button to select:

2. Use

and

to view the required Output number.

3. When nished, press the

ESC

button to exit to the

previous level and then press the

ESC

button to return

to the Operation menu.

Output1

Voltage 120 V60Hz

Current 7.2 A

Power 0.8 kW

PF: 1.00 HF: 100%

Voltage, Current and

Power values for the

chosen Output

Dimming level of the low

voltage HF control side

of the Output

Power factor for

connected load

To Flash the selected Ouput-

press the button. Press

the button a second

time to stop the channel from

ashing.

Brand	iLumin
Model	SC-RP
Category	Controller
Language	English

iLumin SC-RP User Manual

Table of Contents

Questions and Answers:

iLumin SC-RP Specifications