iLumin SC-RP - Step 4: Replace Door and Power the Unit; Replace Front Panels; Power the Switched Relay Controller

P18
Objective: To make safe the Switch Relay Controller and
apply power to it.
To replace the front panels
1. Replace the front panel door and tighten the outer
bolts that hold the panel door in place
To Power the Switched Relay Controller
For SC-RP
1. Locate the main breaker that feeds the Switched Relay
Controller.
2. Turn ON the main breaker.
For SC-RPB
1. Locate the breaker that feeds the main power supply.
2. Turn ON the power supply breaker.
24.000
40.000
24.000
31.000
24.000
48.250
Outer Bolts
Step 4: Replace door on the Switched Relay Controller and power the unit