Name: Immergas AUDAX TOP ErP Series
Brand: Immergas
Rating: 5 (1 reviews)

To Next Page

To Previous Page

AUDAX TOP ErP and Integrated System

It is an electronic controller with microprocessor, realised with

the objective of being a "unique manager" for integrated systems.

anks to this innovative supervisor, it is possible to establish

and activate the most convenient heat source depending on

functional, environmental and "economic" parameters.

In fact, to control everything, the System manager must acquire

the data relative to the external temperature (from the external

probe) and the system ow temperature (relative to the pre-set

climatic curve),after having congured the fuel cost parameter

(e.g. methane gas) and that of the electric energy.

Designed to enhance climatic comfort, it allows you to set

dierent climatic curves for each zone, both for hot and cold.

e user interface is made up from an LCD with matrix and a

6-key membrane keyboard.

Installation takes place on a guide for electric components from

control board.

41.1 TECHNICAL FEATURES

Using the system manager (integrated with the relative expansion

kits) it is possible to control:

• up to 4 AUDAX TOP ErP heat pumps in set conguration;

• Immergas boiler;

• storage tank for D.H.W. production (the D.H.W. temperature

is managed by the NTC probe.

• room C.H. storage tank (the temperature inside the tank is

managed by the NTC probe);

• up to 2 solar circulation units for systems with manifolds

arranged on dierent slopes;

• temperature probes (NTC - PT1000);

• ON/OFF request dry contact;

• integrative electric resistance for DHW;

• integrative electric resistance for heat system;

• variable ow temperature of the heat pump and the boiler

(using the required models), depending on the external tem-

perature (a climatic curve is pre-selected);

• 4 expansion boards to manage the air conditioning system (3 of

which for any mixed/not mixed zones and one used exclusively

in the high temp. zone that operates independently, connected

to the boiler circuit);

• 1 expansion board for the additional functions, namely:

- hot/cold switch-over on distinct systems (for example systems

with radiant panel heating and fan-coil cooling);

- recirculation pump management for DHW;

- acquisition of a signal from a system that generates electrical

energy (e.g. photovoltaic system);

• up to 3 humidity-temp. sensors or 4 zone remote controls;

• up to 3 Dehumidiers.

On the other hand, in terms of the main settings that can/must

be carried out, the System Manager allows you to acquire or

programme:

• outdoor temperature (with a probe already installed on

AUDAX TOP ErP);

• system ow temperature;

• storage tank temperature (even through 2-3 probes, 1 of which

refers to the solar-heated part of the boiler);

• by means of self-diagnosis, detection and display of error codes

in the event of anomalies;

• date and time;

• dierentiated selection and programming for each individual

zone;

• programming the time periods for DHW production;

• anti-legionella program (in a system where there is a boiler or

integrative resistance on the storage tank, in addition to the

Heat Pump);

• cost of combustion (Methane or LPG);

• cost of the electric energy;

• management of the heat/cooling sources.

• SYSTEM MANAGER code 3.021522

41 SYSTEM MANAGER

voltar.com.ua

Immergas AUDAX TOP ErP Series User Manual

Table of Contents

Questions and Answers:

Immergas AUDAX TOP ErP Series Specifications

Related product manuals

Brand	Immergas
Model	AUDAX TOP ErP Series
Category	Heat Pump
Language	English