To Next Page

To Previous Page

AUDAX TOP ErP and Integrated System

EEI ≤ 0.20

Designed to be coupled to cooling plants with radiant panels, the

dehumidier allows to keep the percentage of relative humidity

in the room within the comfort values, preventing the possible

formation of condensate on the walls.

e dehumidier, which is designed to be installed vertically on

the wall (recessed), has pre- and post-cooling coils.

ese components allow excellent control of the air temperature

and humidity.

However, it can function without the aid of pre and post cooling

water coils, thus allowing to dehumidify when the cooling system

is o, typical of mid-season.

In compliance with European Directives, it has EC declaration

of conformity.

Dehumidication can take place:

- with neutral air: without variation of the air temperature,

dehumidies internal rooms;

- with cooled air:contributes to cooling the rooms, as well as

reducing the internal relative humidity.

46.1 DIMENSIONS AND CONNECTIONS

1) Dehumidier

Model A

(mm) B (mm) C (mm)

1 680 545 221

2) Grid 3) Frame

2 750 660 20

3 703 605 228

36,6

164

140,5

3.1) Frame bottom

• DEHUMIDIFIER code 3.021529

(frame and grid to be purchased separately)

46 DEHUMIDIFIER

Connect the F–R (female) ½” ttings of the dehumidier to the cooling system, using the measurements in g. 3.1

voltar.com.ua

Immergas AUDAX TOP ErP Series User Manual

Questions and Answers: