55
7
REPLACING CASCADE GENERATORS
To replace discontinued battery generators, proceed as follows.
e Victrix Pro 35 2 ErP and Victrix Pro 35 1 E thermal module can be replaced with an equivalent IMMERGAS thermal module with the following specications:
Nominal heat input (useful) kW 34.9
Central heating circuit max. operating pressure bar 4.5
Maximum heating temperature °C 95
Safety appliances with the same characteristics
e thermal module 'Victrix Pro V2 35 EU' is compatible for replacing modules 'Victrix Pro 35 2 ErP' and 'Victrix Pro 35 1 E'.
e Victrix 50, Victrix Pro 55 2 ErP and Victrix Pro 55 1 E thermal module can be replaced with an equivalent IMMERGAS thermal module with the following
specications:
Nominal heat input (useful) kW 51.0
Central heating circuit max. operating pressure bar (MPa) 4.5
Maximum heating temperature °C 95
Safety appliances with the same characteristics
e 'Victrix Pro V2 55 EU' thermal module is compatible for replacing modules 'Victrix 50', 'Victrix Pro 55 2 ErP' and 'Victrix Pro 55 1 E'.
e Victrix Pro 68 2 ERP thermal module can be replaced with an equivalent IMMERGAS thermal module with the following specications:
Nominal heat input (useful) kW 65
Central heating circuit max. operating pressure bar (MPa) 4.5
Maximum heating temperature °C 95
Safety appliances with the same characteristics
e 'Victrix Pro V2 68 EU' thermal module is compatible for replacing the 'Victrix Pro 68 2 ERP' module.
e Victrix 75, Victrix Pro 80 2 ErP and Victrix Pro 80 1 E thermal module can be replaced with an equivalent IMMERGAS thermal module with the following
specications:
Nominal heat input (useful) kW 75.0
Central heating circuit max. operating pressure bar (MPa) 4.5
Maximum heating temperature °C 95
Safety appliances with the same characteristics
e thermal module 'Victrix Pro V2 80 EU' is compatible for replacing modules 'Victrix 75','Victrix Pro 80 2 ERP' and 'Victrix Pro 80 1 E'.
e Victrix 90, Victrix Pro 100 2 ErP and Victrix Pro 100 1 E thermal module can be replaced with an equivalent IMMERGAS thermal module with the following
specications:
Nominal heat input (useful) kW 93.0
Central heating circuit max. operating pressure bar 5.4
Maximum heating temperature °C 95
Safety appliances with the same characteristics
e 'Victrix Pro V2 100 EU' thermal module is compatible for replacing modules 'Victrix 90', 'Victrix Pro 100 2 ErP' and 'Victrix Pro 100 1 E'.
e Victrix 115, Victrix Pro 120 2 ErP and Victrix Pro 120 1 E thermal module can be replaced with an equivalent IMMERGAS thermal module with the following
specications:
Nominal heat input (useful) kW 114.5
Central heating circuit max. operating pressure bar 5.4
Maximum heating temperature °C 95
Safety appliances with the same characteristics
e thermal module 'Victrix Pro V2 120 EU' is compatible for replacing modules 'Victrix 115', 'Victrix Pro 120 2 ErP' and 'Victrix Pro 120 1 E'.
To Next Page
