4
Table of contents
1 INTENDED USE .............................................................................................................6
2 OPERATION ..................................................................................................................7
2.1 General ..................................................................................................................... 7
2.2 Nominal width-dependent cutter drive setup ........................................................10
2.3 Device operation .....................................................................................................11
2.4 Control units ...........................................................................................................16
2.4.1 Control unit DRIVE and DRIVElight .......................................................................16
2.4.2 Control unit DRIVE with case ................................................................................17
2.4.3 Overview of connections .......................................................................................18
2.5 Video software ........................................................................................................20
2.5.1 Start the video software ........................................................................................20
2.5.2 Overview of the individual buttons in the footer .....................................................21
2.5.3 Explanation of the individual buttons .....................................................................22
2.5.3.1 Video player menu ........................................................................................22
2.5.3.1.1 Loading and playing back a saved video or image file .............................23
2.5.3.2 Record button ................................................................................................25
2.5.3.3 "Camera" button ............................................................................................25
2.5.3.4 "Text overlays" button ...................................................................................25
2.5.3.5 "Minimise" button...........................................................................................25
2.5.3.6 "Settings" button ............................................................................................26
2.5.3.6.1 Basic settings ..........................................................................................26
2.5.3.6.2 Text overlay .............................................................................................27
2.5.3.7 Select Language and unit ..............................................................................28
2.5.3.8 Service menu ................................................................................................28
2.5.3.9 Information menu ..........................................................................................29
2.6 Operation during working procedure ....................................................................30
2.7 Finishing work ........................................................................................................31
2.8 Manual cable drum with hand crank (optional) ....................................................33
2.9 Cable drum with automatic reeling (optional) .......................................................34
2.10 Meter counting incl. data loading and keyboard (optional) .................................35
2.10.1 Data loading and keyboard ...............................................................................35
2.10.2 Meter counting (optional) ...................................................................................37
2.11 Cutting tools............................................................................................................38
To Next Page
Loading...