IMS IM483 - Hardware Specifications; Section Overview; Mechanical Specifications; Figure 2.1 IM483 Dimensions

8 IM483 Operating Instructions Revision R032306
9IM483 Operating Instructions Revision R032306
1
2
3
4
5
6
7
8
0.150
(3.8)
2.45
(62.23)
2.750
(69.9)
1.00
(25.4)
0.312
(7.92)
0.290
(7.4)
2.710
(68.8)
3.00
(76.2)
0.030
(0.8)
4X Ø 0.160
(4X Ø 4.1)
1.20
(30.50)
0.410
(10.4)
1734
1
0.025
(0.6)
18
IM483-34P1
S e c t i o n 2
H a r d w a r e S p e c i f i c a t i o n s
S e c t i o n O v e r v i e w
This section will acquaint you with the dimensional information, pin de-
scription, power, environmental and thermal requirements of the IM483.
It is broken down as follows:
n Mechanical Specications.
n Electrical Specications.
n Thermal Specications.
n Pin Assignment and Description.
M e c h a n i c a l S p e c i f i c a t i o n s
Shown is the standard 8 position screw terminal set for the IM483.
Dimensions and specications for the different connection options are
available in Appendix A: Standard Connection Options, of this document.
Dimensions are in inches, parenthesis dimensions are in millimeters.
Figure 2.1: IM483 Dimensions