Incon OPTImizer 2 - Page 67

67
Sends/Executes Control Operations:
WRITE Binary Outputs: g Never 1 Always 1 Sometimes 1 Congurable
SELECT/OPERATE: 1 Never g Always 1 Sometimes 1 Congurable
DIRECT OPERATE: g Never 1 Always 1 Sometimes 1 Congurable
DIRECT OPERATE – No ACK: g Never 1 Always 1 Sometimes 1 Congurable
Count>1: g Never 1 Always 1 Sometimes 1 Congurable
Pulse On: 1 Never g Always 1 Sometimes 1 Congurable
Pulse Off: g Never 1 Always 1 Sometimes 1 Congurable
Latch On: g Never 1 Always 1 Sometimes 1 Congurable
Latch Off: g Never 1 Always 1 Sometimes 1 Congurable
Queue: g Never 1 Always 1 Sometimes 1 Congurable
Clear Queue: g Never 1 Always 1 Sometimes 1 Congurable
Reports Binary Input Change Events when no
specic variation requested:
1 Never
1 Only Time-Tagged
1 Only Non-Time-Tagged
g Congurable
Reports Time-Tagged Binary Input Change Events when no
specic variation requested:
1 Never
1 Binary Input Change With Time
1 Binary Input Change With Relative Time
g Congurable
Sends Unsolicited Responses:
1 Never
1 Congurable
1 Only certain objects
1 Sometimes
g ENABLE/DISABLE UNSOLICITED
Sends Static Data in Unsolicited Responses:
g Never
1 When Device Restarts
1 When Status Flags Change
Default Counter Object/Variation:
1 No Counter Reported
g Congurable
1 Default Object ____
Default Variation ____
1 Point by Point List Attached
Counters Roll Over at:
1 No Counter Reported
1 Congurable
g 16 Bits (65,535)
g 32 Bits (4,294,967,295)
1 Other Value ______
1 Point by Point List Attached
Sends Multi-Fragment Responses:
g Yes
1 No