Incon OPTImizer 2 - DNP3.0 Point List

69
6.6.3 DNP3.0 Point List
The following table identies for each data type, the data points available in the device.
Binary Input Points Slave >> Master
Static (Steady-State) Object Number: 1
Change Event Object Number: 2
Static Variation reported when variation 0 requested: 1 (Binary Input 2 without status)
Change Event Variation reported when variation 0 requested: 3 (Binary Input Change with Time)
Event
Class
Point
Index
Default
Group
Default
Variable
Name/Description
Circuit Breaker Monitor
1 0 2 2
Breaker Is Open
1 1 2 2
A-B Logic Failure Alarm Acve
1 2 2 2
Contact Life Warning Acve Phase A
1 3 2 2
Contact Life Warning Acve Phase B
1 4 2 2
Contact Life Warning Acve Phase C
1 5 2 2
Contact Life Danger Alarm Acve Phase A
1 6 2 2
Contact Life Danger Alarm Acve Phase B
1 7 2 2
Contact Life Danger Alarm Acve Phase C
1 8 2 2
Trip Time Alarm Acve
1 9 2 2
Arc Time Alarm Acve Phase A
1 10 2 2
Arc Time Alarm Acve Phase B
1 11 2 2
Arc Time Alarm Acve Phase C
1 12 2 2
Clearing Time Alarm Acve Phase A
1 13 2 2
Clearing Time Alarm Acve Phase B
1 14 2 2
Clearing Time Alarm Acve Phase C
1 15 2 2
Travel Time Alarm Acve
1 16 2 2
Closing Time Alarm Acve
1 17 2 2
Operaon Count Alarm Acve
1 18 2 2
No-Operaons Alarm Acve
1 19 2 2
Restrike Alarm Acve Phase A
1 20 2 2
Restrike Alarm Acve Phase B
1 21 2 2
Restrike Alarm Acve Phase C
SF
6
Monitor
1 22 2 2
Sensor Malfuncon Alarm Acve
1 23 2 2
Low Density Alarm Acve
1 24 2 2
Trend Alarm Acve
1 25 2 2
CT Failure Alarm Acve Phase A
1 26 2 2
CT Failure Alarm Acve Phase B
1 27 2 2
CT Failure Alarm Acve Phase C
30 5 Default Static Analog
32 5 Default Event Analog
20 1 Default Static Counter
22 1 Default Event Counter
1 2 Default Static Binary
2 2 Default Event Counter