User Guide - v7 3
TABLE OF CONTENTS
Legal considerations 2
Copyright 2
Contact address 2
1 About This Guide 7
Safety notices 7
2 Hardware Description 9
Variants 9
Internal variant 9
Standard Vandal Resistant variant 10
Environmental Vandal Resistant variant 11
Connections 12
Binary IO connections 13
Power requirements 14
Cabling requirements 14
Wiring requirements 14
3 Getting Started 17
Package contents 17
Internal variant 17
Standard Vandal Resistant variant 18
Environmental Vandal Resistant variant 19
Powering up the 9000 SD Fixed Dome 20
Using a Power over Ethernet switch 20
Using a Power over Ethernet injector/midspan 20
Auxiliary power 20
Initial camera configuration 21
Initial IP properties 21
Using the configuration pages 21
Using the console port 24
Attaching the device to the network 26
4 Installation 27
Installing the Internal variant 27
Fit the Mounting Plate 27
Run the cabling to the Mounting Plate 28
Fit the Camera Assembly to the Mounting Plate 28
Setting up the sensor 29
Focus Procedure 30
Installing the Standard Vandal Resistant variant 30
Without Exit Collar 30
To Next Page
Loading...