Inficon Ecotec E3000 Original Operating Instructions

7 Warnings and error messages 61
Translation of the original operating instructions Ecotec E3000, kina22en1-19, 1507
* The work may be carried out only by service personnel who have been authorized
by INFICON.
E96 Error in the temperature control of the TC
(E025)
The main air filter is soiled. Clean or replace the filter, see page 68.
Confirm the work, see page 65.
The ambient temperature is too high. Please note the ambient conditions, see page 14.
E97 Error of the temperature sensor in the TC
(E026)
The temperature sensor is defective. Contact the INFICON customer service.
E98 Error in the motor stage or the control
(E037)
There is an error in the motor stages or the control. Contact the INFICON customer service.
E99 Error on the power supply (F007) The supply voltage has failed. Contact the INFICON customer service.
Table 10: Warning and malfunction messages (cont.)
No. Message Possible error sources Fault clearance

Inficon Ecotec E3000 Specifications

General

Brand	Inficon
Model	Ecotec E3000
Category	Security Sensors
Language	English