EonStor CS Installation Guide
page 101 / 165
2-2.1 Drive
You can manage the Drives in GS via EonOne Settings > Storage > Drives
You can manage the Drives with the following actions:
1. Copy & Replace: Copy and replace is the manual process of copying the data from a source drive to a
target drive, then proceeding replacement of the source drive.
2. Mange Spare Drive: When a drive fails, the spare drive can rebuild its content and take over its role.
3. Read/Write test: The function can only be performed on new (unformatted) drives.
To Next Page
Loading...
