EonStor CS Installation Guide
page 107 / 165
2-2.2 Pool
A Pool is a logical unit that combines the storage resources of one or several logical drives together. On top
of the Pool is where you can build the block-level or file-level volumes.
You can manage the Pools in GS via EonOne Settings > Storage > Pools
You can manage the Pool with the following actions:
1. Add pool: Create a new disk pool.
2. Manage logical drive: Manage member logical drive.
3. Configure pool: Edit pool.
4. Expand: Expand the capacity for pool.
5. Delete: Delete a pool to release more usable capacity.
To Next Page
Loading...
