Infortrend EonStor GS Series - 1-8.6 How to Replace a PSU and a Cooling Module (FAN)

EonStor CS Installation Guide
page 76 / 165
Installation Guide
1-8.6 How to replace a PSU and a cooling module (FAN)
The GS 2000/3000/4000/5000 series redundant models have two redundant, hot-swappable PSUs that
provide power and built with a cooling fan that helps with the airflow, providing an efficient ventilation.
Please contact your reseller when there is a hardware component that needs to be replaced.
PSU/Cooling Module for 2U 24/ 2U 25/ 2U 12/ 3U 16/ 4U 24-bay form factor model
The following table shows PSU/Cooling module components.
PSU/Cooling Module for 2U24/2U25/2U12/3U16/4U24 bay form factor model
Number
LED Name
Extraction Lever
Retention Screw
Power Socket
Power Button
PSU Status LED
Fan
1. Loosen the screw on the faulty PSU/Cooling module and push the extraction lever.