Infortrend EonStor GS Series - 1-2.5 Drive Tray LED

EonStor CS Installation Guide
page 34 / 165
Installation Guide
1-2.5 Drive Tray LED
There are two LEDs on the tray that indicate the status of drives.
Note!
 4U60bays model drive trays is covered by the enclosure. There is no LED for it’s Drive status, please
monitor the disk status via EonOne.
 When you see the abnormal LED, please check if there is any failed drive event reported on EonOne.
Contact your reseller if you need to replace the drive.
Drive Tray LED
Number
LED Name
Color/Status
Description
Drive Busy
Data is being written or read from the drive. The
drive is busy.
A hard drive is plugged in but there is no activity
on the disk drive.
OFF
The hard drive is plugged in but there is no
activity going on.
Power
Status
The drive bay is occupied and working normally.
Disk drive failed or connection problem occurred.