Infortrend EonStor GS Series - 1-2.3 Controller Panel LED

EonStor CS Installation Guide
page 25 / 165
Installation Guide
1-2.3 Controller Panel LED
Please refer to the following table to check what each LED represents.
PSU LED (for GS/GSe/GSc 1000/2000/3000/4000 series and GSe Pro 3000 series)
Number
LED Name
Color/Status
Description
Control
Status
A controller is operating normally.
 A component has failed or
inappropriate RAID configurations
cause system faults.
 The controller is initializing.
CBM Status
 Supercapacitor and FBM (flash backup
module) are installed in the system.
 The CBM is ready for operation.
 The CBM failed in operating: either the
supercapacitor or FBM.
 Either the super capacitor or FBM is
missing.
The supercapacitor is charging.
Cache Dirty
 Cache memory is dirty.
 Data in FBM is flushed to the cache.
 Errors occurred with cache memory
(ECC errors).
 Data is flushed from FBM to drive
when the power is restored.
 The supercapacitor temperature