EonStor CS Installation Guide
page 26 / 165
reading is abnormal (out of 0 to 35°C
range).
The supercapacitor is not present.
The cached data is being transferred to the
FBM after a power outage. Once the transfer
is done, all LEDs will turn off. This signal is
local to each controller.
The cache is clean, and the supercapacitor
can sustain the memory in case of power
loss.
Traffic is going on the host bus.
No traffic is going on the host bus.
Successfully reset the controller after
pressing and holding the Restore Default
button.
To Next Page
Loading...
