Infortrend EonStor GS Series - 1-4. Individual Drive Status Checking

EonStor CS Installation Guide
page 40 / 165
Installation Guide
1-4. Individual Drive Status Checking
Please go to EonOne’s Settings > Storage > Drives to check the drive status.
CS Drive Status
Status
Description
New Drive
When there is a drive that was newly-scanned and has not yet written any data
inside.
On-Line
Drive is working normally.
Used
The drive is already a member of another environment but was plugged-in to the GS.
Formatted
Drive has already been written with some data, but it is not a member drive.
Exiled
A failed drive but rescanned in the GS; if a workable drive was removed and
reinserted, the GS would also recognize it as Exiled.
Not ready
GS cannot scan the drive or the drive which was inserted is not bundle drive.
Bad
The drive failed.
Absent
The drive is unplugged.
 Click here to know how to clear a reserved space when you see “Used” or “Formatted”
 Click here to know how to rebuild the faulty drive.