Infortrend EonStor GS Series - 1-7. Network Status Checking

EonStor CS Installation Guide
page 49 / 165
Installation Guide
1-7. Network Status Checking
1-7.1 File-level Channel:
1. Go to EonOne’s Settings > Access > Channel & network to check the file-level network connection, you can set
the IP address, subnet mask, and Default gateway by clicking Edit.
Network Status Checking
Color
Description
The file-level channel links up and works normally.
The file-level channel links down.
You can also perform the connection test for file-level channel.
1. Click Edit.
2. Click Test Connection.