EonStor CS Installation Guide
page 24 / 165
The system is connected to the power source, but the
system is not turned on.
The PSU is operating normally.
The PSU is faulty.
Over Voltage Protection (OVP)/ Over Power Protection
(OPP)/ Over Current Protection (OCP) is activated.
The fan built with the PSU is faulty.
The power supply warning events such as high temperature,
high power, high current (12V), or slow fan occur while the
power supply continues to operate.
The system is not connected to the power.
Note: Lighting icon means the color LED is flashing.
To Next Page
Loading...
