Innovative Technology NV11 - Page 75

NV11 Manual Set – Section 3 27
Copyright © Innovative Technology Ltd 2012 GA963-2
Halt State Options
Set Route
To set the pay in route for inserted bank notes to either
Cashbox or Note Float module, select the desired
denomination(s) and click the required route. The system will
send the commands to the device and store these preferences
so that they will be set again on the next start-up.
Set Options
Using this dialog, the user can setup the device SSP address
and eSSP keys by double clicking on the required option.
Get Error Status
This option displays any device error messages in the ‘System
Events’ window.
Download Update
File
This option allows the user to download an ITL update file to
the connected device.
Send SSP
Command
This option brings up the SSP communications dialog which
allows the user to send individual commands to the connected
device.
CAUTION!
Take care when changing
eSSP key
Exercise care when changing the device eSSP key.
The user must make a note of the new key and
change the host key to match. If the key is not
known then device must be returned to ITL for key
reset.