Safety Instructions
- 8 -
◆
Do not install the equipment if you nd damage, rust, or indications of use on the
equipment or accessories.
◆
Do not install the equipment if you nd water seepage, component missing, or damage
upon unpacking.
◆
Do not install the equipment if you nd the packing list does not conform to the
equipment you received.
Storage and Transportation
◆
Store and transport this equipment based on the storage and transportation
requirements for humidity and temperature.
◆
Avoid transporting the equipment in environments such as water splashing, rain,
direct sunlight, strong electric eld, strong magnetic eld, and strong vibration.
◆
Avoid storing this equipment for more than three months. Long-term storage requires
stricter protection and necessary inspections.
◆
Pack the equipment strictly before transportation. Use a sealed box for long-distance
transportation.
◆
Use an even and at truck to transport the equipment for long distance and ensure
that the installation pad is level. On snowy and rainy days, take proper measures to
proof rain and snow before transportation, such as, packing the equipment with felt
fabric.
◆
Never transport this equipment with other equipment or materials that may harm or
have negative impacts on this equipment.
◆
Use professional loading and unloading equipment to carry large-scale or heavy
equipment.
◆
When carrying this equipment with bare hands, hold the equipment casing rmly with
care to prevent parts falling. Failure to comply may result in personal injuries.
◆
Handle the equipment with care during transportation and mind your step to prevent
personal injuries or equipment damage.
◆
Never stand or stay below the equipment when the equipment is lifted by hoisting
equipment. Ensure sucient tonnage ratings of the crane, cables, and hooks when
lifting the equipment.
Installation
◆
Thoroughly read the safety instructions and user guide before installation.
◆
Do not modify this equipment.
◆
Do not loosen xed bolts (especially those marked in red) on equipment components.
◆
Do not install this equipment in places with strong electric or magnetic elds.
◆
When this equipment is installed in a cabinet or nal equipment, protection measures
such as a reproof enclosure, electrical enclosure, or mechanical enclosure must be
provided. The IP rating must meet IEC standards and local laws and regulations.
To Next Page
Loading...
Need help?
General