- 60 - - 61 -
Connecting the PC Connecting the PC
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
10
Press the scroll button to select
[ Subnet Mask], and then press the [OK]
button.
1
2
3
4
5
6
Network Setup 1/2 Page
TCP/IP
EtherTalk
IP Address Set
IPv4 Address
Subnet Mask
Use
Online
button
to
return
to
standby
screen
NetBIOS over TCP
11
Enter the subnet mask in the same way
as the IP address. When all entries are
complete, press the [BACK] button.
6
Subnet Mask
Use Online button to return to standby screen
Network Setup
Use Online button to return
xxx.xxx.xxx.xxx
Subnet Mask
12
Press the scroll button to select
[Gateway Address], and then press the
[OK] button.
1
Network Setup 2/2 Page
Gateway Address
Use
Online
button
to
return
to
standby
screen
13
Enter the gateway address in the same
way as the IP address. When all entries
are complete, press the [BACK] button.
1
Gateway Address
Use Online button to return to standby screen
Network Setup
Use Online button to return
xxx.xxx.xxx.xxx
Gateway Address
14
Press the [ON LINE] button to complete
the network setup.
3
Use the 10-key pad to enter the
administrator password.
The default factory-set password is
"aaaaaa". Press the [OK] button after
entering each individual character.
4
Press the [OK] button.
5
Check that [Network Setup] has been
selected, and press the [OK] button.
Admin Setup 1/2 Page
Network Setup
Print Setup
PS Setup
PCL Setup
Use
Online
button
to
return
to
standby
screen
USB Setup
6
Press the scroll button several times
to select [IP Address Set], and then
press the [OK] button.
1
2
3
4
5
6
Network Setup 1/2 Page
TCP/IP
EtherTalk
IP Address Set
IPv4 Address
Subnet Mask
Use
Online
button
to
return
to
standby
screen
NetBIOS over TCP
7
If setting the IP address manually, press
the scroll button
to select [Manual],
and then press the [OK] button.
Go to Step 8
1
2
3
4
5
6
TCP/IP
NetBIOS over TCP
EtherTalk
IP Address Set
IPv4 Address
Subnet Mask
Use Online button to return to standby scr
Network Setup
Use Online button to return to standby scr
Use Online button to return to standby scr
Use Online button to return
2
Manual
Auto
1
1/1 PageIP Address Set
If acquiring the IP address automatically,
check that [Auto] has been selected, and
then press the [OK] button.
Go to Step 14
1
2
3
4
5
6
TCP/IP
NetBIOS over TCP
EtherTalk
IP Address Set
IPv4 Address
Subnet Mask
Use Online button to return to standby scr
Network Setup
Use Online button to return to standby scr
Use Online button to return
2
Manual
Auto
1
1/1 PageIP Address Set
8
Press the scroll button several times
to select [IPv4 Address], and then click
the [OK] button.
1
2
3
4
5
6
Network Setup 1/2 Page
TCP/IP
EtherTalk
IP Address Set
IPv4 Address
Subnet Mask
Use
Online
button
to
return
to
standby
screen
NetBIOS over TCP
9
Use either the scroll buttons or the
10-key pad to enter the fi rst 3 digits
of the IP address, and then press the
[OK] button. Enter the next 3 digits
in the same way. When all entries are
complete, press the [BACK] button.
To move to the next box, press the [OK]
button.
1
2
3
4
5
6
TCP/IP
NetBIOS over TCP
EtherTalk
IP Address Set
IPv4 Address
Subnet Mask
Use Online button to return to standby sc
Network Setup
Use Online button to return
xxx.xxx.xxx.xxx
IPv4 Address
To Next Page
Loading...
