- 72 - - 73 -
Connecting the PC Connecting the PC
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
9
Click [Default].
10
Select the printer displayed as [Bonjour]
in [Kind], and check that [Intec
CS5000(PS)] is displayed in [Use].
The name of the printer will be
displayed in the format "Intec-CS5000-
(last 6 digits of MAC address)".
11
Click [Confi gure] in the next screen.
If the optional expansion tray unit has
been mounted to the device, you can
change the number of trays.
If an optional built-in HDD has been
mounted, enable the [Hard Disk] check
box.
10
Select the printer, and check that [Intec
CS5000(PS)] is displayed in [Print
Using].
11
Click [Add].
12
Check that [CS5000] is displayed as
added to the printer list, and close the
[Print & Scan] screen.
Note
�
If [Intec CS5000(PS)] is not displayed correctly in
[Kind], click [-] to delete the device from [Printers],
and repeat Steps 7 to 10 again.
13
Remove the "Software DVD-ROM" from
the computer.
Using Bonjour ( Rendezvous)
Installing the printer drivers on the
computer
1
Check that the device and PC are
connected, and that the power supply is
turned ON.
Reference
�
“Connecting Using LAN Cables” (P.57)
2
Insert the "Software DVD-ROM" into the
computer.
3
Double-click the Intec icon on the
desktop.
4
Double-click [Driver]> [Installer for Mac
OS X].
5
Enter the Mac OS X administrator
password, and click [Install software].
Finish the installation by following the
instructions displayed on the screen.
6
Select [System Preferences] from the
Apple menu.
7
Click [Print & Scan].
8
Click [+], and select [Add printer or
scanner].
To Next Page
Loading...
